Brewing Photos

The following photos show a Specific Mechanical Systems skid mounted brewery system in operation.  All photos were generously provided by Great Reliance Food & Beverage Co., and Ian Ward, Brewvision Ltd.

Click on the thumbnails to enlarge the image.

Photo shows a tight brewhouse work area.  Note the fermentation vessels on the left.

Diverter panel being used for a wort runoff from the lauter tun to the brewkettle.

Photo shows the mash being emptied into the mash tun by an overhead flex auger.  Note this small mash/lauter tun does not employ a rake system -  mashing in is done by hand.

Sparging in process.  Note rotating sparge arm for full bed coverage.

Manually stirring the mash in the mash/lauter tun.

Transfer via diverter panel from wort heat exchanger to unitank/fermenter.

Oxygenating the wort during transfer to unitank / fermenter.

Unitank/fermenter

View of hot wort grant connnected to diverter panel, transfer in progress.

View of hot wort grant connnected to diverter panel, transfer in progress.  Note level of wort provides buffer for transfer pump.